Program for downloaded from the Internet - How to set StrongDC + +

Before you download files using Strong DC + + program, make sure you have installed on your computer an antivirus program up to date.

Download Strong DC

If you want to reinstall DC + +, and not lose settings (the eventual reinstallation of the system or I do not know why ...) need to know these things. 

DC + + directory and files are:
- Queue.xml - in it are your download lists
- Dcplusplus.xml - he is setting in dc + + (incl. Nick Share)
- Favorites.xml - favorite hubs and users

Save these files, or which ones you are interested, then you can put them back, and you will have the same settings, same downloads, that same favorite.
P.S. If you upgrade DC + + or ODC, these files are not overwritten, so it keeps. (You can, however, to make a backup safety)

 If you use DC, these files can be found in [the directory where you installed the program] / Settings, eg C: Program Files/StrongDC/Settings. Keep files DCPlusPlus.xml, queue.xml and Favorites.xml   
To mention that if you pass the ODC to DC or DC + +, incomplete downloads will be continued and completed, but not using segmented downloading. The only options we have available in the downloads DC will be initiated in DC.

StrongDC + + settings 

To run the program StrongDC++ click 2 times a file called "StrongDC.exe", in this case "sdc241-32.exe".
If you have a firewall or the Windows is enabled, you must allow the program to connect to the Internet 

Select Settings from the File menu option

On the right of "Personal information"
       The "Nick" nick edit form:
       [Country] [County] [Provider] Nick where
       "[COUNTRY] '= Country where you are
       "[STATE] '= County where you are
       "[PROVIDER]" = company providing
       Internet service, where you
       subscriber
       eg [RO] [VL] [RDS] Basil

 Access Connection settings and you should have checked one of two options: Direct Connection or Firewall (passive, worst case). If you check the first option and after conducting searches did not get results, then check the firewall.

 Data provided by other users in the hub are called "Share". By checking the box next to folders, data in those folders are available to users on the hub to be copied by them.

Hesing site is creating an "index" for the users to see what you put at their disposal to "Share"

"Upload slots" is No. stabilid operators for each hub. He determined No. of users that can share a copy of your.
"Slot toads" is set by the controller according to the number of hubs that are connected for the "Upload slots" to be equal to no slots required to connect the hub.

How put a hub address? Quite simply, click on "yellow star" or press "CTRL + F"  

Opens "Hub Propreties Favorites" click on "New" and then write in the box: The "Name" Hub name in our case "GligaHub" at "Address" write address hub where you want to log in our case, "hubgl.webhop.net" and give "OK"

Checkbox next to the name for an automatic connection to open DC's then you "Connect"